Dogtra RB 1000 Série Notice D'utilisation page 26

Dog Collar Toggle Switch on the Dogtra RB 1000 Series
Models
The Dogtra RB 1000 Series model has a toggle switch on the face
of the transmitter located above the Run/Point button. The toggle
switch allows for selection of either collar.
Set the toggle switch on the Orange position to select the Orange
collar and the Green position to select the Green collar.
NOTE : In the event of a one-dog model user , the toggle switch
should be in OR position.
48
LCD Screen
The LCD screen indicates the beeper mode and the sound.
The battery life indicator shows: 3 bars = full charge, 2 bars =
medium charge, and 1 bar = needs charge.
The LCD screen shows "r-P", when the Run/Point button is
pressed. On the other hand, "-P-"is brought out on the LCD
screen, when the Point button is pushed down.
In order to confirm the current sound, push down the Locate
button on the side of the transmitter. The Sound button allows
choosing among four different sounds of the receiver/collar and
the selected sound appears on the LCD screen (L1, L2, H1, H2).
49