Dogtra RB 1000 Série Notice D'utilisation page 31

ON/OFF Magnetic Red Dot (To Activate the Receiver)
To activate the Dogtra RB 1000 Series, place the red dot on the
back of the transmitter to the red dot on the receiver/collar. Hold
the two red dots together for a moment until the LED light on the
receiver/collar comes on. The power-on melody on the receiver/
collar will also activate.
To deactivate the Dogtra RB 1000 Series, repeat the same
procedure holding the two red dots together momentarily. The
Power-off melody on the receiver/collar will sound after the LED
light turns red, indicating that the unit is now shut off.
58
Receiver Indicator Light (LED window)
Located on the front of the receiver/collar, the indicator light
comes on and blinks once every 4 seconds after the collar is
turned on. The color of the LED indicates the battery life of the
receiver.
(Green = full charge, Amber = medium charge, Red = needs
charge)
When the "Locate" button on the transmitter is pushed, the collar
indicator light will glow steadily as long as you hold the button
down, for up to 12 seconds.
When the "Run/Point, Point, Sound" button is pushed, the light
comes on for a fraction of a second.
59