Understanding Your Training System; Turning The Iq Mini On/Off; Transmitter Button Function - Dogtra iQ MINI Mode D'emploi

UNDERSTANDING YOUR TRAINING SYSTEM

1. TURNING THE IQ MINI ON/OFF

42
T o turn the receiver/collar on, place the
red dot on the back of the handheld
transmitter to the red dot on the
receiver/collar. Hold the two red dots
together for a moment until the LED light
on the receiver/collar comes on.
To turn the receiver/collar off, repeat the
same procedure holding the two red dots
together momentarily. The LED light will
turn red for a brief moment indicating
that the receiver/collar is now off.
The handheld transmitter does not have
an on/off button and it will only activate
when the buttons are pressed.

2. TRANSMITTER BUTTON FUNCTION

N - Nick Button
When the Nick button is pressed, the
receiver emits a single rapid pulse of
electrical stimulation.
C - Constant Button
Pressing the Constant button gives
continuous stimulation as long as
the button is pushed, for up to 12
seconds. If the button is not released
after 12 seconds, the stimulation will
automatically turn off as a safety feature.
P - Pager Button
Pressing the Pager button will give a
vibration for as long as the button is
pressed, for up to 12 seconds.
43