Charging The Battery - Dogtra iQ MINI Mode D'emploi

7. CHARGING THE BATTERY

1. Attach the charging cables to both
the transmitter and receiver, as shown
above.
2. Plug the charger into a 230 volt wall
outlet or, if using the auto charger,
plug into a cigarette lighter only for
50
lithium polymer batteries (use a 120
volt charger for North America). All
indicator lights should glow red when
properly plugged in and the unit will
automatically shut off during the
charging process. You will need to turn
the unit on again before use once the
unit is fully charged and unplugged
from the battery cable.
3. The lithium polymer battery is fully
charged within 2 hours. The lights will
stay red during the charging process.
The red light will turn green once the
unit is fully charged.
4. After charging, cover the battery
charging receptacle with the rubber
plug on the transmitter.
Charger info
Manufacturer : HON-KWANG
Manufacturing country : CHINA
Model name : HK-AP-050A100-EU
INPUT : 100~240V~50/60Hz 0.2A/
OUTPUT : 5V 1.0A
ATTENTION
During battery charging, the unit must
be close to the wall outlet and the wall
outlet must be easily accessible for
security reasons.
51