Dogtra iQ MINI Mode D'emploi page 29

Attention! To attach the charger:
(1)
* *
*
1. Place the square latch on the base of
the charger to the LED screen notch
on the receiver.
52
(2)
2. Make sure the gold prongs on the
charger and gold plates on the receiver
are facing each other.
(3)
3. Push the pointed part of the charger
until you hear the snap to secure the
placement.
To detach the charger:
Pull on the pointed part of the charger.
Note:
1. Fully charge the unit before using it for
the first time.
2. Do not charge the batteries near any
flammable substances.
3. Fully charge the batteries if the unit is
to be stored without use for a period
of one month or more.
4. Always use Dogtra approved chargers.
If improper chargers are used, the LED
will flash amber or may not light up at
all.
53