Publicité
Les langues disponibles
Les langues disponibles
Safety
1
Machine elements
Carrying belt
1
2
Control panel
3
Positive terminal socket
4
Connection socket for control line
5
Gas connection torch
6
Negative terminal socket
7
Air intake
8
Connection for inert gas
9
Power cable/battery cable with device
coupling (optional)
2
Explanation of symbols
2.1
Meaning of the symbols in the
operation manual
Danger to life and limb!
If the danger warnings are disregarded,
this can cause slight or severe injuries
or even death.
Danger of property damage!
Disregarding danger warnings can
cause damage to workpieces, tools,
and equipment.
General note!
i
Indicates useful information about
the
product
Environmental information
Indicates information about environ-
mental protection.
3
Safety
Hazard-free working with the machine
is only possible if you read the operat-
ing and safety instructions completely
and strictly observe them.
Please obtain practical training before
using the machine for the first time.
04.19
I
and
equipment.
909.4169.9-03
Remote control connecting socket
10
Danger of death through electrocu-
tion!
See chapter "13.3 Connecting the
power supply" on Page 35.
Some of the options and accessories
i
shown or described may not be a part
of the scope of delivery.
Subject to change.
Bullet points:
 Work instruction.
Designates operations that have to be carried
out.
9 Result.
Designates the result of the operation(s).
‰ Note
Designates an explanation / information
2.2
Meaning of the symbols on the
machine
Danger!
Read the user information in the opera-
tion manual.
Disconnect the mains plug!
Pull out the mains plug before opening
the housing.
Follow the accident prevention regula-
tions (UVV
Remove all solvents, degreasers, and
other flammable materials from the
working area before starting welding.
Only applicable for Germany. Can be ordered from
1
Carl Heymanns-Verlag, Luxemburger Str. 449, 50939
Köln.
).
1
- 31 -
Publicité
