Publicité
Les langues disponibles
Les langues disponibles
How To Avoid CVT Drive Belt and Component Failure
CVT clutch and belt life can be dramatically extended by avoiding these common operating mistakes:
CVT Fail Reason
Attempting to load the vehicle onto a truck bed
or tall trailer in high gear�
Starting out on a steep incline in high gear.
Constant driving in high gear at low RPM,
driving at just above clutch engagement RPM,
or at low speed (approximately 3mph~6mph
[5km/h~10 km/h]).
Insufficient warm-up of CVT exposed to low
ambient temperatures.
Slow and easy CVT clutch engagement.
Towing/pushing at low RPM/low ground speed. Use low gear only�
Utility use/plowing snow, dirt, etc.
Heavy vehicle load operating at low speed
FEATURES & CONTROLS
Shift transmission to low gear during loading of the ATV to
prevent belt burning.
When starting out on an incline, use low gear or dismount
the
ATV (after first applying the park brake) and perform the K-
turn.
Low gear is highly recommended for cooler CVT operating
temperatures and longer component life. Drive at a higher
speed or use low gear more frequently.
Warm the engine before driving, the CVT drive belt will
become more flexible and prevent belt burning.
Use the throttle with purpose and effectively for efficient CVT
clutch engagement.
Use low gear only�
Use low gear only�
69
How To Avoid CVT Failure
Publicité
