CF MOTO CFORCE 1000 Guide De L'utilisateur page 109

OPERATION OF YOUR ATV
ATV turning dynamics
To achieve maximum traction while operating in 2WD or 4WD, the two rear wheels perform as one axle and
turn together at the same speed. Furthermore, when operating in 4WD-LOCK mode, the front wheels will
also turn together at the same speed. Therefore, unless the wheel on the inside of the turn is allowed to slip
or lose some traction, the ATV will resist turning. The special turning technique described in this manual must
be used to allow the ATV to make turns quickly and easily. It is essential that this skill be learned first at low
speed�
Turning on curves
As you approach a curve, slow down and begin to turn the handlebars in the desired direction. As you do
so, put your weight on the footboard to the outside of the turn (opposite the desired direction) and lean your
upper body into the turn. Use the throttle to maintain an even speed through the turn. This maneuver will let
the wheel on the inside of the turn slip slightly, allowing the ATV to maneuver the turn properly.
105