CF MOTO CFORCE 1000 Guide De L'utilisateur page 141

Transmission oil change
1� Place the ATV on a level surface.
2� If the engine was running, wait a sufficient period for the oil to settle and cool.
3� Place an oil pan under the engine to collect the used oil.
4� Remove the oil dipstick
5� Remove the oil drain bolt
6� Place a new sealing washer on the oil drain bolt, then assemble and tighten the drain bolt.
NOTE: Remove oil dipstick
. Tightening torque of drain bolt
1
MAINTENANCE
�
2
and drain the oil�
1
first to relieve any pressure in the transmission cavity, then remove drain bolt
2
: 25 N•m
1
2
1
137