Télécharger Imprimer la page

CF MOTO CFORCE 1000 Guide De L'utilisateur page 61

Publicité

Les langues disponibles

Les langues disponibles

3
2WD / 4WD System Switch
This vehicle is equipped with on-command "2-WD"/"4-WD" and "4-
WD/F-LOCK" switches. Activate these switches according to the
traction required for different driving conditions.
: Switches two wheel drive (2-WD) and four wheel drive (4-WD).
A
: Switches four wheel drive (4-WD) and four wheel drive lock
B
(F-lock)�
The vehicle should be stopped before applying or releasing the
function of 2WD/4WD/F-lock. Applying or releasing drive modes
while the vehicle is in motion can lead to component damage�
"F-lock" Operation
In "F-lock" mode, both front axles are locked together and rotate
at the same speed to provide maximum front wheel traction. The
steering will require more force for turning. The drive mode indicator
on the dashboard will flash until front differential lock is engaged.
Riding before the differential is properly engaged (e.g. when the
indicator light is flashing) will cause the engine speed to be limited
until engagement is complete.
Maximum traveling speed in F-lock is limited to 22 mph (30 km/
h). If conditions require full engine power to be available, press the
override switch on the left control to disable speed limiting.
FEATURES & CONTROLS
WARNING
B
Vehicles without rear differential
57
A

Publicité

loading

Ce manuel est également adapté pour:

Cforce 800xcCf1000auCf1000atrCf1000au-f