Télécharger Imprimer la page

CF MOTO CFORCE 1000 Guide De L'utilisateur page 153

Publicité

Les langues disponibles

Les langues disponibles

7� Inspect the paper air filter and verify it is okay to reinstall. Softly
brush off accumulated dust if necessary. Install a new filter as
necessary�
CAUTION
Do not use liquid to wash paper filter element.
8� Install the pre-filter onto the air filter� Apply a thin film of
lubricant on the inside diameter of the air filter rubber seal.
9� Install the air filter and clamp onto the air filter housing inlet.
Tighten the clamp securely.
10� Reinstall the air filter housing cover and spring clips. Verify the
cover is installed correctly and is sealing properly�
11� Reinstall the decorative cover assembly. Ensure the grommets
are engaged and secure.
NOTE
The air filter must be checked and replaced more often if the machine is operated in extremely dusty areas
or if it becomes wet. Each time air filter maintenance is performed, check the air inlet to the air filter box for
obstructions, the fittings of the air filter housing rubber joint, throttle body, and manifold for an airtight seal.
Check that all fittings are tightened securely to avoid the possibility of unfiltered air entering the engine.
CAUTION
Do not start engine without air filter element. Non-filtered air will enter into the engine and cause engine
wearing and damage. In addition, driving without air filter will also decrease performance and engine
overheating�
MAINTENANCE
149
5
4
6

Publicité

loading

Ce manuel est également adapté pour:

Cforce 800xcCf1000auCf1000atrCf1000au-f