CF MOTO CFORCE 1000 Guide De L'utilisateur page 167

MAINTENANCE
Front access cover
A
Removal:
Remove the rubber grommet
A
Take out the front access cover toward the front of vehicle�
B
B
NOTE:
Remove front access cover, then inspection and maintenance can
be done for the radiator assy, reservoir tank, relay box, and fuse.
Fuse and Relay replacement
The main fuse , fuse panel , EPS fuse and relay panel
1 2 4 3
are located under the front access cover.
If a fuse is blown, turn off the main switch and install a new fuse
4
of the specified amperage. Test by turning on main power and
switches. If the fuse immediately blows again, consult your dealer.
2
3
1
CAUTION
Always use a fuse of the specified rating.
Never use conductive material in place of the proper fuse.
163