Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Engine intake/exhaust valve adjustment
The intake and exhaust valve clearances change with use of the vehicle, which can result in improper fuel/air
supply or engine noise. To prevent this, the valve clearances must be adjusted according to the maintenance
schedule. This adjustment should be performed by a professional service technician. Contact your dealer for
service�
NOTE
Engine intake valve clearance (cold engine): .002 in ~ .005 in. (0.06mm ~ 0.14mm)
Engine exhaust valve clearance (cold engine): .004 in ~ .007 in. (0.11mm ~ 0.19mm)
Engine Idle Speed
This vehicle is equipped with an electronic fuel injection system. There are no consumer provisions to adjust
engine idle speed. The throttle body is a vital part of the fuel system which requires very sophisticated
adjustment, and was set at the factory. If the settings are disturbed, poor engine performance and damage
may result. Check engine idle speed for stability and contact your dealer for service if necessary. Contact
your dealer in case of an abnormal engine idle condition.
NOTE
Engine idle speed: 1300 rpm ±130 rpm (engine at operating temperature)
135
Publicité
