Resistance Of The Suit Material - Dräger SPC 4700 Notice D'utilisation

8.5

Resistance of the suit material

CLF
Test method Standard
Abrasion resis- EN 530:2010
tance (method 2)
Flex-cracking EN ISO
resistance 7854/B:1997
Tear resistance EN ISO 9073-
(longitudinal) 4:1997
Tear resistance EN ISO 9073-
(transverse) 4:1997
Tensile strength EN ISO 13934-
(longitudinal) 1:1999
Tensile strength EN ISO 13934-
(transverse) 1:1999
Anti-static surface EN 1149-1:2006
Puncture resis- EN 863:1995
tance
Flammability EN 13274-4:2001
(method 3)
Seam strength EN ISO 13935-
2:2014
CPM
Test method Standard
Abrasion resis- EN 530:2010
tance (method 2)
Flex-cracking EN ISO
resistance 7854/B:1999
Tear resistance EN ISO 9073-
(longitudinal) 4:1999
Tear resistance EN ISO 9073-
(transverse) 4:1999
Tensile strength EN ISO 13934-
(longitudinal) 1:2013
Tensile strength EN ISO 13934-
(transverse) 1:2013
Anti-static surface EN 1149-1:2006
Puncture resis- EN 863:1995
tance
Flammability EN 13274-4:2002
(method 3)
Seam strength EN ISO 13935-
2:2014
8.6 Resistance to penetration of infectious
agents (CLF and CPM)
Test method Standard
Penetration by synthetic ISO 16603
blood
Penetration by Phi-X 174 ISO 16604
bacteriophage
Wet bacteria penetration ISO 22610
Penetration by liquid aero- ISO/DIS 22611
sol
Instructions for use |
Dräger SPC 4700
Result Class
>2000 cycles 6
>1000 cycles - 1
<2500 cycles
114 N 5
118 N 5
243 N 3
236 N 3
-
7
2.62*10 Ω
28 N 2
Passed -
>240 N 4
Result Class
>2000 cycles 6
>100000 cycles 6
83 N 4
55 N 3
160 N 3
96 N 2
9 -
1.45*10 Ω
16 N 2
Passed -
>130 N 4
Result
1)
Class
20 kPa 6/6
20 kPa 6/6
Break- 6/6
through-
time:
>75 min.
log 3/3
>5 log cfu
Test method Standard
Penetration by microbes, ISO/DIS 22612
dry
1) according to EN 14 126:2003
The welded-on gloves are approved in accordance with EN ISO 374-5:2016
(Protective gloves against dangerous chemicals and micro-organisms).
|
Technical data
Result 1)
Class
log <1 3/3
11