Publicité
Les langues disponibles
Les langues disponibles
Unwanted door movements can lead to serious injury or
death
Incorrect installation or use of the operator can cause unintentional door
movements. This can cause persons or objects to become trapped and cause
damage.
•
To minimize these risks, follow the instructions and instructions in the
manuals that come with the product.
Incorrect mounting materials can lead to a loss of stability or to the drive
breaking out, thus reducing the Safety of the entire plant. This can cause
personal injury and damage to property.
SAFETY INSTRUCTIONS FOR HAZARD AVOIDANCE
• Only use suitable mounting materials when installing the drive to ensure
secure mounting.
• Only suitable and approved fixing materials may be used for installation.
Place the portal so that the portal column with the motor is placed on the inside
of the property.
The entry post must be set up so that the gate closes against the rear wall of the
entry post (see drawing p. 18)
Connect the power cable to the socket, connect the transmitter of the light
barrier to the 24V power supply.
After completion of the installation, the qualified / competent person must issue
an EC declaration of conformity for the door system (complete machine
consisting of door and operator) in accordance with the scope of application and
affix the CE mark and a type plate.
WARNING
WARNING
Unsuitable fixing materials
22
Publicité
