Training Stand-By; Training - Kettler SK Manuel D'entraînement Et D'utilisation

Training and operating instructions
By pressing "Presets", you will skip to the menu "Current
Default Settings" and the default settings, which are to be
entered or which have already been entered at the "active"
programme are displayed.
By pressing "Training" the values and settings are adopted
and you will skip to the view "Training stand-by"

Training stand-by

Display: Training stand-by
The values were adopted from the current default settings
of the programme.
Note:
The pulse profile height can be increased or reduced by the
–/+ keys: during training stand-by the entire profile and
during training only the workout.

Training

The training programme "Performance (manual) Count Down"
is used as an example for the training display.
10
GB
All manuals and user guides at all-guides.com
Display: Training stand-by
If you pedal with more than 10 rpm, the training display
will start.
During training, you can change the multi-purpose display in
order to view more information.
Pressing "Display" switches the information from "Current
Training" to "Programme Indication", then to "Pulse
Information", then "Average Values" etc.
Display : Current Training
The upper display shows the Presettings in count-down
mode and the lower display shows workout values in
count-up mode.
In this example the performance has been increased to 125
Watt and the pulse has increased to 90 beats/min.
Display: Programme indication
The current programme is displayed
Display: Puls information
The pulse settings and default settings are display
Display: Average values