Kettler SK Manuel D'entraînement Et D'utilisation page 33

• The Value "Maximum Pulse" 170. This value has been
informed by the user's data (220 - age), e.g., Thomas' (50
years). Medically founded, it indicates the maximum tolera-
ble pulse rate that users of a given age may have but
should not have while working out.
• Use "Maximum Pulse" to reduce or deactivate this value.
The pulse rate indicated in % refers to this value: Current
pulse to maximum pulse and the depths of sections of pulse
programmes. You may enter values to select target pulse
values.
• Use "Alarm if Maximum Pulse Exceeded" to set whether an
audible alarm should be activated when the maximum
pulse has been exceeded. If "Maximum Pulse" has been
set to Off, the alarm will also be deactivated.
• In "Target Pulse", you have 2 options: "Target Pulse
Control" On or Off.
Off will disable the target pulse monitoring function.
On gives you further options, if "Maximum Pulse" has been
set to On:
"Fat Burning (65%)". This means that 65% of your age-speci-
fic maximum pulse will be controlled or monitored accor-
ding to the user's data (220 - age) as pulse rate value.
Example: 111
"Fitness (75%)". This means that 75% of your age-specific
maximum pulse has been used as a basis.
Example: 128
All manuals and user guides at all-guides.com
"Manual (40%-90%)". This means that you may enter a value
in % between 40% and 90 % by using the –/+ keys.
Example: 128 (70% will be calculate as recommended
value)
On gives you just one option, if "Maximum Pulse" has been
set to Off:
Manual (40bpm - 200bpm). This means that you may enter a
non-age-specific pulse value between 40 and 200 by using
the –/+ keys.
Example: 130 (Will be displayed as recommended value)
Press "Activate" to activate the selection highlighted in black
(active).
The selected target pulse will be used as presetting for pulse
programmes. During the work out, this value will be achieved
and held constant by performance control. For the other work-
out programmes, it will be used as a guideline to achieve
pulse values that are 10 beats below or over the workout tar-
get pulse. This pulse rate will be controlled by two arrows in
the pulse display.
Press "Back" to save the settings.
Menu
Settings (for all users)
This menu offers the possibility to carry out display- and appli-
ance-specific settings and adjustments in 5 sub menus. These
adjustments apply to all users.
Settings –> 1. Units
Here you determine in which language the menus are display-
ed, the display of speed and distance in kilometres or miles.
You can also delete the values of the overall kilometres and
the overall training time.
Press "Delete" followed by "Delete OK" to execute this opera-
tion.
Press "Back" to save the settings.
Note:
"Delete OK" deletes the total kilometre values and the total
time.
Settings –> 2. Display
Here, you can set brightness, contrast and background colour
of the display.0=Off, 1= light blue, 2=red, 3=green, 4=blue,
5=turquoise
Press "Back" to jump back to the main menu. The settings will
be saved.
Press "Cancel" to jump back to the main menu. The settings
will not be saved.
Note:
When the optimal contrast is set, there will be no heavy sha-
des. The setting "Contrast" applies to the lower display and
"Brightness" to both displays.
15
GB