Display; Training; Without Settings; With Settings - Kettler ST2520-64 Mode D'emploi

Training and Instructions Manual
20
GB

Training

1. Training without settings
• Press a key
All segments are displayed
The total kilometres odo is displayed briefly
The 'ready for training' status is displayed with the zero
values, the current braking level and the pulse values (if
pulse measurement is active).
and / or
• Rowing
TThe training time and the following values are display-
ed in incremental form.
The SCAN display changeover is active
2. Training with settings

Display:

'Ready for training'

• Press "SET": Settings area
Setting the time (ZEIT/TIME)
• Enter values using 'Plus' or 'Minus' (e.g. 18:00)
Confirm with 'SET'.
Display: next menu 'SCHLÄGE/STROKES'
Setting the rowing strokes (SCHLÄGE/STROKES)
• Enter values using 'Plus' or 'Minus' (e.g. 540)
Confirm with 'SET'.
Display:
next menu: "ENERGIE"
Energy settings (ENERGY / k-joules / kcal)
• Enter values using 'Plus' or 'Minus' (e.g. 280)
Confirm with 'SET'.
• Select the unit k-joule or kcal with 'Plus' or 'Minus'.
Confirm with 'SET'.
Display: next menu: "FREQUENCY"
Stroke frequency setting (FREQUENCY)
• Enter values using 'Plus' or 'Minus' (e.g. 30)Confirm
with 'SET'.
Display: next menu: "AGE"
Inputting of age (AGE)
Inputting your age assists with ascertaining and monito-
ring the maximum pulse rate (HI symbol, warning tone, if
activated).
• Enter the values using 'Plus' or 'Minus' (e.g. 40).
This results in the calculation of the maximum pulse rate at

180 (220 - age).

Confirm with 'SET'.
Display: next menu: "alarm tone"