Quickstart (Basic Orientation); Training Readiness; Training Pause; Training Pause/End - Kettler YT 6799-11 Mode D'emploi

Training and Operating Instructions
14
EN
Quickstart
(for basic orientation)
Without Specific Settings
• Press a key
Display:
• All segments are briefly displayed. (Segment
Test)
• The total hours and kilometers are briefly dis-
played.
Thereafter, change to the display "Training Readi-
ness"

Training Readiness

Display:
• All areas display "zero" except pulse (if active)
Start training by pedaling
Training Start
Display:
• Pedal Rotation segments, Distance, Speed, Ener-
gy and Time: count goes upwards.
• Pulse (if active)
Brake Adjustment:
• By turning to the right the brake level is raised,
and by turning to the left it is reduced.
Training Pause or End
At Training Pause or End, Average Values from the
last training unit are displayed with the Ø symbol.
Display
• Average Values (Ø):
Pedal Rotations and Speed
• Total Values
Energy, Distance and Time
• Current Pulse (if active)
Standby Mode
Device switches to Standby mode 4 minutes after
Training End.
Press any key; Display begins again with Segment
Test, display of total hours, total kilometers and
training readiness.