Nuova Simonelli TALENTO Notice D'instructions page 38

To clean the appliance, set the machine to the
"0" energy level, that is, "WITH THE MACHINE
SWITCHED OFF AND THE PLUG REMOVED
FROM THE MAINS" and follow the instruc-
tions in this handbook.
If the appliance breaks down or fails to work
properly, switch it off. Any intervention is
strictly forbidden. Contact qualified experts
only. Repairs should only be made by the
manufacturer or authorized service centres.
Only original spare parts must be used.
Failure to observe the above, could make the
appliance unsafe.
For installation, the qualified electrician
must fit an omnipolar switch in accordance
with the safety regulations in force and
with 3 (0,12) or more mm (in) between con-
tacts.
To avoid dangerous overheating, make
sure the supply cord is fully uncoiled.
Do not obstruct the extraction and/or dissi-
pator grids, especially of the cup warmer.
The user must not replace the appliance
supply cord. If the cord is damaged,
switch off the appliance and have a quali-
fied technician change the cord.
36
If no longer using the appliance, we rec-
ommend making it inoperative; after
removing the plug from the mains elec-
tricity, cut the power supply cable.
Do not dispose of the machine in the
environment: to dispose of the machine,
use an authorised centre, or contact the
manufacturer for relative information.
To ensure that the machine is properly
ventilated, place it with the ventilation
side at a distance of 15 cm (5,9 in) from
walls or other objects.
Once a machine wash cycle has been
started, do not interrupt it, as detergent
residues may then be left inside the deliv-
ery group.
Use the steam nozzle with care and never
place hands below the jet of steam. Do
not touch the nozzle immediately after
use.
Fig. 8
CAUTION
RISK OF POLLUTION
CAUTION
RISK OF INTOXICATION
EN
Fig. 9
Fig. 10