Kenwood KM240 Serie Instructions page 9

Masquer les pouces Voir aussi pour KM240 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
carrot and coriander soup
ingredients
25g butter
1 onion chopped
1 clove garlic crushed
750g carrot cut into 1.5 cm cubes
(alternatively for a lighter soup use 600g carrot cut
into 1.5 cm cubes)
cold chicken stock
10-15ml ground coriander
salt and pepper
method
1 Melt the butter in a pan, add the onion and garlic and
fry until soft.
2 Place the carrot into the blender, add the onion and
garlic. Add sufficient stock to reach the 1.5 level
marked on the goblet. Fit the lid and filler cap.
3 Blend on the pulse setting for 5 seconds for a coarse
soup or longer for a finer result.
4 Transfer the mixture to a saucepan, add the coriander
and seasoning and simmer the soup for 30 to 35
minutes or until cooked.
5 Adjust the seasoning as necessary and add extra
liquid if required.
Additional recipes can be found on the Kenwood
website:
www.kenwoodworld.com
Food Processor AT284
(if supplied)
Use the food processing attachment to chop, slice,
shred and rasp. The citrus juicer attachment (if supplied)
can be used to juice citrus fruit and can only be used
with the AT284 food processor.
important
When removing the packaging, ensure the plastic
blade cover is removed from the knife blade. Take
care the blades are very sharp. The cover
should be discarded as it is to protect the blade
during manufacture and transit only.
safety
The blades and discs are very sharp, handle with
care. Always hold the knife blade by the
finger grip at the top, away from the cutting
edge, both when handling and cleaning.
Always remove the knife blade before pouring
contents from the bowl.
Keep hands and utensils out of the processor bowl
whilst connected to the power supply.
Never use your fingers to push food down the feed
tube. Always use the pusher/s supplied.
Before removing the lid from the bowl or the
attachment from the power unit:-
switch off;
● ●
wait until the blades/discs have completely
● ●
stopped;
When slicing/shredding or rasping don't let
the bowl fill up as far as the cutting disc:
empty it regularly.
Do not exceed the 'MAX' capacity level on
the bowl.
Should excessive vibration occur when using this
attachment, either reduce the speed or stop the
machine and remove some of the contents.
This machine will be damaged and may
cause injury if the interlock mechanism is
subjected to excessive force.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Km260 serieKm280 serie

Table des Matières