Basic Information Relevant To The Control Of The Model Helicopter - Reely 1527787 Notice D'emploi

All manuals and user guides at all-guides.com
e) Basic Information Relevant to the Control of the Model Helicopter
Before you fly your model, you should first familiarise yourself with the control possibilities open to you and thereby
be able to fly safely. The model helicopter is controlled via the two control levers at the remote control transmitter.
The following functions are available:
Pitch Function
With the pitch function you can control the flying height of the helicopter (see figure 8). The left control lever (also
see figure 1, item 7) is used for control. It can be moved upwards from the lower position, into which it returns due
to a spring. Since the angles of attack of the rotor blades are not modifiable, setting the flying height is effected via a
common speed modification of the two rotors.
If the control lever is in the lower position, the motors and the rotors stop. If you push the control lever upwards, the
two rotors start up and increase their speed according to the position of the lever. When the control lever reaches the
centre position, the helicopter should fly forward while maintaining height.
Caution, important note!
The helicopter is built to be slightly heavier in front ex works so that it independently starts flying forward
after take-off.
32
Figure 8