Festo Robotino 4.0 Notice D'utilisation page 46

Robotino 4.0 Mobile Robot System
6.2 Electrical system
46
Disconnect from all sources of electrical power!
•
Switch off the power supply before working on the circuit.
•
Please note that electrical energy may be stored in individual components. Further
information on this issue is available in the datasheets and operating instructions
included with the components.
Warning!
Capacitors inside the device may still be charged even after being disconnected from
all sources of voltage.
•
Disconnect the power supply after charging Robotino 4.0. If the charger is
disconnected from the mains but left connected to Robotino 4.0, it can
discharge/damage the batteries.
Smoke/fire risk
Smoke poisoning / danger of burns from cable fires
•
Only use the specified fuse to protect the batteries
Risk of explosion and fire!
• Make sure that the rechargeable batteries are never short-circuited.
•
Establishing and interrupting electrical connections
– Electrical connections may only be established in the absence of voltage.
– Electrical connections may only be interrupted in the absence of voltage.
• Use safety extra-low voltage (SELV) only: max. 24 V DC.
WARNING
WARNING
WARNING
CAUTION
© Festo Didactic 8101524