Scan An Image - HP Photosmart C4340 All-in-One Série Guide D'utilisation

1 xD-Picture Card
2 Memory Stick, Memory Stick Pro, Memory Stick Select, Memory Stick Magic Gate,
Memory Stick Duo or Duo Pro (adapter optional), or Memory Stick Micro (adapter required)
3 Secure Digital (SD), Secure Digital Mini (adapter required), Secure Digital High Capacity
(SDHC), MultiMediaCard (MMC), MMC Plus, MMC Mobile (RS-MMC; adapter required),
TransFlash MicroSD Card, or Secure MultiMedia Card
4 CompactFlash (CF) types I and II
The most recent image on the card appears on the display.
3. Press the buttons next to the up arrow or down arrow icons on the display to scroll
through the photos on your memory card until the photo you want to print appears.
4. Leave the default Size setting as Borderless.
NOTE:
icons on the display) and cannot be changed.
5. Press the Copies button until the number of copies you want to print appears on the
display.
6. Press the button next to Print on the display.
TIP:
on your memory card. When you see a photo you want to print, you can press the
Print button to add that photo to the print queue.

Scan an image

For original documents or images placed on the glass, you can start a scan from your
computer or from the HP All-in-One. This section explains the second option: how to scan
from the control panel of the HP All-in-One to a computer.
To use the scan features, the HP All-in-One and computer must be connected and turned
on. The HP Photosmart Software must also be installed and running on your computer
prior to scanning. To verify that the HP Photosmart Software is running on a Windows
computer, look for the HP Digital Imaging Monitor icon in the system tray at the lower
right side of the screen, near the time.
The Quality setting is set to best mode (as indicated by the three star
While the photo is printing, you can continue scrolling through the photos
Scan an image 29