HP Photosmart C4340 All-in-One Série Guide D'utilisation page 22

6. Now you need to decide how you want the product to answer calls, automatically or
manually:
• If you set up the product to answer calls automatically, it answers all incoming
calls and receives faxes. The product will not be able to distinguish between fax
and voice calls in this case; if you suspect the call is a voice call, you will need to
answer it before the product answers the call. To set up the product to answer
calls automatically, turn on the Auto Answer setting.
• If you set up the product to answer faxes manually, you must be available to
respond in person to incoming fax calls or the product cannot receive faxes. To
set up the product to answer calls manually, turn off the Auto Answer setting.
7. Run a fax test.
If you pick up the phone before the product answers the call and hear fax tones from a
sending fax machine, you will need to answer the fax call manually.
Case I: Shared voice/fax line with answering machine
If you receive both voice calls and fax calls at the same phone number, and you also have
an answering machine that answers voice calls at this phone number, set up the
HP All-in-One as described in this section.
Figure 2-8 Back view of the HP All-in-One
1 Telephone wall jack
2 "IN" port on your answering machine
3 "OUT" port on your answering machine
4 Telephone (optional)
5 Answering machine
6 Use the phone cord supplied in the box with the HP All-in-One to connect to the "1-LINE" port
Set up the HP All-in-One for faxing 19