Print Cartridge Troubleshooting; Support Process - HP Photosmart C4340 All-in-One Série Guide D'utilisation

Chapter 4
2. Gently pull the paper out of the rollers.
CAUTION:
and wheels for torn pieces of paper that might be remaining inside the product. If you do not
remove all the pieces of paper from the product, more paper jams are likely to occur.
3. Replace the rear door. Gently push the door forward until it snaps into place.
4. Press the button next to OK to continue the current job.

Print cartridge troubleshooting

If you are experiencing problems with printing, you might have a problem with one of the print
cartridges. For more information, see

Support process

If you have a problem, follow these steps:
1. Check the documentation that came with the HP All-in-One.
2. Visit the HP online support Web site at www.hp.com/support. HP online support is available to
all HP customers. It is the fastest source for up-to-date device information and expert assistance
and includes the following features:
• Fast access to qualified online support specialists
• Software and driver updates for the HP All-in-One
• Valuable HP All-in-One and troubleshooting information for common problems
• Proactive device updates, support alerts, and HP newsgrams that are available when you
register the HP All-in-One
3. Call HP support. Support options and availability vary by device, country/region, and language.
For a list of support phone numbers, see the printed documentation that came with the product.
58 HP Photosmart C4340 All-in-One series
If the paper tears when you are removing it from the rollers, check the rollers
"Replace the print cartridges" on page 32 in this guide.