Scan An Image Or Document; Make A Copy - HP Photosmart C4380 All-in-One Série Guide D'utilisation

Chapter 3
4. Do one of the following:
• For faster printing with slightly reduced resolution, leave the Quality setting at
best resolution (as indicated by the two star icons on the display).
• For much faster printing with moderately reduced resolution, press the Quality
button until one star icon appears on the display (indicating normal resolution).
• For maximum resolution, press the Quality button until three star icons appear
on the display.
5. Leave the default Size setting as Borderless.
6. Press the Copies button until the number of copies you want to print appears on the
display.
7. Press the Print button.
TIP:
on your memory card. When you see a photo you want to print, you can press the
Print button to add that photo to the print queue.

Scan an image or document

For original documents or images placed on the glass, you can start a scan from your
computer or from the HP All-in-One. This section explains the second option: how to scan
from the control panel of the HP All-in-One to a computer.
To use the scan features, the HP All-in-One and computer must be connected and turned
on. The HP Photosmart Software must also be installed and running on your computer
prior to scanning. To verify that the HP Photosmart Software is running on a Windows
computer, look for the HP Digital Imaging Monitor icon in the system tray at the lower
right side of the screen, near the time.
NOTE:
can cause the HP All-in-One to lose some of its scan functionality. If this happens,
you can restore full functionality by restarting your computer or by starting the
HP Photosmart Software.
To scan to a computer
1. Load your original print side down on the right front corner of the glass.
2. Ensure that there are no memory cards inserted in the memory card slots on the
HP All-in-One.
3. Press Scan.
A preview image of the scan appears on your computer, where you can edit it. Any
edits that you make apply to the current scan session only.
The HP Photosmart Software has many tools that you can use to edit your scanned
image. You can improve the overall image quality by adjusting the brightness,
sharpness, color tone, and saturation. You can also crop, straighten, rotate, or resize
the image.
4. Make any edits to the preview image, and then click Accept when you are finished.

Make a copy

You can make quality copies from the control panel.
20 HP Photosmart C4380 All-in-One series
While the photo is printing, you can continue scrolling through the photos
Closing the HP Digital Imaging Monitor icon in the Windows system tray