Chloride Power Protection Linear Plus Manuel D'utilisation page 27

CHLORIDE LINEAR Plus/RM
The 3 position maintenance switch includes the function of the output
breaker. Terminals for control of backfeed protection are on the backside.
Fig. 11: Rear View Linear Plus 10 kVA
The following figure show the units Linear Plus RM 6kVA and 10 kVA with
battery extension Rackmount BP 10 kVA.
To connect the battery extension Rackmount BP with the Linear Plus RM
plug the battery cable (16) into the socket (9) and into a battery extension
socket (13).
User Handbook SU59802UM01, rev.3/ Last modified: 08/2005
Fans
Ext. battery connector
Terminals area (behind safety
cover)
Slot interface COM (card is option)
ESD contacts
Interface COM 3
Ports for parallel operation (behind
safety cover)
3-position maintenance switch (safety
cover not illustrated). Output switch is
integrated
Input 3-ph. circuit breaker (mains 1)
Input circuit breaker (Reserve /
mains 2)
Terminals for backfeed protection
Space for additional battery charger
behind this panel
Cable fixing
Installation
E
N
EN-25