Publicité
Les langues disponibles
Les langues disponibles
NOTE
The filling and venting operations can be facilitated using the automatic venting equipment BUBBLE
BLUSTER (supplied separately).
CAUTION
Use "OL 150" oil
"OL150" hydraulic oil is specifically formulated for
in time the high qualitative level and performance of the
Its "Zinc-Free" special formula promotes protection from sea oxidation. The special anti-wear and
stabiliser mixture components, of which "OL150" is made-up, allow obtaining an excellent result in
terms of product life and consistent performance in different environmental conditions.
hydraulic oil meets ISO 10592 regulation relating to hydraulic steering systems.
is not responsible for any possible damage or performance drops due to the use of
hydraulic oils other than "OL150".
CAUTION
Under no circumstance use transmission oils of the AFT Dexron II type, brake oils, engine oils or
other flammable and toxic fluids!
The following are oils compatible with "OL150":
- Shell Tellus T15 or Tellus T22
- Mobil DTE 11M
NOT E
will not guarantee compatibility of the cited oils with OL150 in the event of a change in
the formulation by the producers of these oils; in particular, it will not guarantee compliance with ISO
10592 relating to hydraulic steering systems.
performance and/or duration.
In the days immediately following the filling, you need to monitor the oil level in the tank; if necessary,
top up the system.
Initially, the oil level may drop, as small amount of air initially emulsified in the fluid may
disperse. Perform the different bleeding procedures, as described below.
32
page
-
CYLINDRE HYDRAULIQUE POUR MOTEUR HORS BORD
or compatible oil.
Installation and Maintenance Manual
for the purpose of maintaining longer
products.
will not be liable for any possible drops in
Publicité
