Publicité
Les langues disponibles
Les langues disponibles
20
Loosen the locking screw (22) of the fine adjusting ring nut (23), unscrew the latter by
hand and bring it abuts the stainless steel washers, until complete recovery of clearances.
CAUTION
Do not force the adjustment ring nut with tools or pliers.
21
Check proper installation of the cylinder by manually moving the motor to the right and
left, there must be no interference between cylinder and parts of the motor and of the boat.
NOTE
The movement should be as symmetrical as possible with respect to the central position,
so as to obtain the same steering angle on both sides.
CAUTION
The motor must be shut down through the cylinder end stroke, without abut the mechanical
stop (24) the motor is fitted with. Otherwise you have to modify the installation by changing the
thickness of the spacers used and repeat the procedure from step 11.
24
28
page
-
CYLINDRE HYDRAULIQUE POUR MOTEUR HORS BORD
Installation and Maintenance Manual
23
22
24
Publicité
