Eu Declaration Of Conformity (Extract) - Tractel Tirak L 500 P Série Manuel D'installation Et De Maintenance

Installation and operating manual
14

EU Declaration of Conformity (Extract)

that the machine described complies with technological safety standards that were applicable to
the equipment in the EUROPEAN UNION when it was launched on the market by the manufacturer.
X 300 P, X 400 P, X 500 P, X 520 P, L 500 P, X 600 P, X 620 P, X 820 P, X 1030 P, X 2050 P
The above-mentioned machine corresponds to the model specified on the prototype testing certificate, approved by the certificate
Commissioning the machine is prohibited until the machine in which this is installed complies as a whole with the
regulations of the 2006/42/EC Directive, the corresponding national legislation for implementing the regulations in
accordance with national law and the corresponding declaration of conformity has been issued.
The valid EN 1808 standard must be applied for the SAE in which the machine is installed.
EN-60
The manufacturer hereby declares
TRACTEL Greifzug GmbH
Scheidtbachstraße 19–21 51469 Bergisch Gladbach
represented by
Dipl. Ing. Martin Melder
General Manager
DECLARATION OF CONFORMITY
APPLICABLE DIRECTIVES AND STANDARDS:
2006/42/EC; 2014/35/EU; 2014/30/EU;
EN 1808; EN ISO 12100; EN ISO 13849-1
DESIGNATION
Rope traction hoist
APPLICATION
Transport of persons
SERIAL NUMBER
Year of manufacture
from 01.2019
ZP/C037/16 N01
Issuer of the prototype testing certificate:
DEKRA Testing and Certification GmbH
Dinnendahlstrasse 9
44809 Bochum
notified under No. 0158 by the Commission of the European Community
Responsible for the documentation:
Dipl. Ing. Martin Melder, Tel.: +49 (0) 2202 1004 0
Bergisch Gladbach, date
MODEL
number
G1035.4 – 01/2019