4.3
Operating unit
Depending on the product version the hoist is controlled by a pendant control, control box or a central control unit.
4.3.1 Standard operating unit
Illustration 11
Item
Name
With a single speed:
1
UP button
2
DOWN button
3
EMERGENCY stop button
With two speeds:
4
UP button
5
DOWN button
6
EMERGENCY stop button
G1035.4 – 01/2019
Function
Move load upwards / pull wire rope:
–
Press and hold the button
Move load downwards / release wire rope:
–
Press and hold the button
Activate:
–
Press the button in.
Deactivate:
–
Turn the button to the right until it releases.
Move load upwards /pull wire rope:
–
Press the button halfway and hold:
slow
–
Press the button completely and hold:
fast
Move load downwards / release wire rope:
–
Press the button halfway and hold:
slow
–
Press the button completely and hold:
fast
See Point 3.
Installation and operating manual
EN-25