Accessories; Wire Ropes; Installation And Commissioning; Checks To Be Undertaken Before Starting Assembly - Tractel Tirak L 500 P Série Manuel D'installation Et De Maintenance

Installation and operating manual
4.8

Accessories

The system manufacturer is responsible for selecting and using the accessories in accordance with the local conditions. You must also
abide by any other requirements of the respectively applicable regulations and standards.
5

Wire ropes

Incorrect wire rope or wire rope with incorrect diameter!
Using an incorrect wire rope leads to a risk of falling or being injured by falling objects and the risk of malfunctions!
– In order to operate safely only use original wire ropes authorized by Tractel with the correct wire rope diameter and the
required construction.
– If the load cannot be guided by on-site means then an antispin wire rope with a swivel hook must be used. Swivel hook
bearings must turn freely when under load.
– The required wire rope diameter is listed in Illustration 1.
6

Installation and commissioning

6.1

Checks to be undertaken before starting assembly

6.1.1 Check the suspension rig and anchoring points
– Check to ensure that the on-site anchoring points have the necessary breaking strength capacity.
6.1.2 Inspecting the operating site
Illustration 17
EN-30
DANGER!
G1035.4 – 01/2019