Setting The Release Time - Assa Abloy effeff 42130-10 Notice D'installation

Configuration

Setting the release time

The release time can be set between one and thirty seconds in the door
code device.
1 Set the release time with the rotary switch at the top of the main board.
· The time is set in 2-second increments.
· When the switch is set to "0", the relay pick-up time is 1 second.
If an electric strike with monitoring contact is used, switching the monitoring
contact leads to an automatic interruption of the release time.
This means that the door closed subsequently is blocked again and the code
must be entered again.
45
EN