Configuration; Programming The Main Code - Assa Abloy effeff 42130-10 Notice D'installation

Programming
the main code

Configuration

Configuration

Programming the main code

Example 1: The number sequence 659874 is to be programmed
as the new main code.
1 Open the device with the key.
2 Press the programming button on the main
circuit board.
 The green LED on the front of the housing flashes.
3 Enter the new main code on the device keypad.
 As the maximum number of digits has been
reached, the code is adopted and
the programming mode is automatically
switched off.
In the majority of use cases, it is sufficient to programme one main code.
The main code can be two to six digits long and can consist of any
number sequence.
6 5 9
8 7 4
41
EN