Ryobi RBC26SESB Manuel D'utilisation page 70

Masquer les pouces Voir aussi pour RBC26SESB:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
CLEANING THE AIR FILTER SCREEN (Fig. 12)
For proper performance and long life, keep air filter
screen clean.
■ Ensure the unit is in the off position.
■ Remove the air filter cover.
■ Remove the air filter and clean it with warm soapy
water.
■ Rinse, and let the air filter dry completely.
■ Work two drops of lubricant into the air filter.
■ Replace the air filter (fits only one way).
■ Replace the air filter cover.
NOTE: The air fi lter should be replaced annually for the
best performance.
FUEL CAP
WARNING
A leaking fuel cap is a fire hazard and must be
replaced immediately.
The fuel cap contains a non-serviceable filter and a
check valve. A clogged fuel filter will cause poor engine
performance. If performance improves when the fuel cap
is loosened, check valve may be faulty or filter clogged.
Replace fuel cap if required.
SPARK PLUG REPLACEMENT (Fig. 13)
WARNING: The material of the spark plug is
metal. It becomes very hot after you stop the
engine. Wait for the engine to cool down before
you disassemble the metal spark plug boot to avoid
personal injury.
NOTE: The engine uses a Champion RCJ-6Y spark plug
or equivalent with 0.63 mm electrode gap. Use an exact
replacement and replace the spark plug annually.
1. Stop the engine.
2. Hold the front portion of the rubber protect boot and
pull it away from the housing.
3. Pull the rubber protect boot upward to release the
hook.
4. Twist the metal spark plug boot in a clockwise or
counterclockwise direction and pull it away from the
spark plug.
5. Loosen the spark plug by turning it in a counterclockwise
direction using a combination wrench. Remove the old
spark plug and replace with a new one. Reinstall the
metal spark plug boot and the rubber protect boot.
STORAGE (1 MONTH OR LONGER)
Drain all fuel from tank into a container approved
for fuel. Run engine until it stops.
Clean all foreign material from the trimmer. Store it in
a well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden
English (Original instructions)
20
20
chemicals and de-icing salts.
Abide by all ISO and local regulations for the safe
storage and handling of fuel. Excess fuel should be
used up in other 2-stroke engine powered equipment.

Publicité

Chapitres

Table des Matières
loading

Table des Matières