Replacing The Ploughshare - Checchi & Magli BABY COMPACT Manuel D'utilisation Et D'entretien

Replacing the ploughshare

UN41-0687BO
Proceed as outlined below.
1) Move the lever (A) and turn the guide (B) downwards,
if fitted.
2) Remove the circlip (C).
3) Unscrew the wing nut (D).
4) Remove the washer (E).
5) Lift and hold the clamping device (F).
English language
INFORMATION CONCERNING REPLACEMENTS
6) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
7) Hold the ploughshare and remove the screw (G) and
washer (H).
For the assembly, carry out the same operations as for
disassembly but proceeding in reverse order.
NOTICE
During assembly, fit the Plant Control device inside
the ploughshare.
41
B
8
Use and maintenance