Checchi & Magli BABY COMPACT Manuel D'utilisation Et D'entretien page 54

Information and safety signs
WARNING
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
F
UN41-0654BO
A) Hazard plate: read the use and maintenance manual
before using the work vehicle.
B) Hazard plate: switch off the tractor; remove the igni-
tion key and store in a safe place before carrying out
any type of work on the work vehicle.
C) Hazard plate: do not remain on the seat with the
work vehicle lifted off the ground.
D) Information plate: strap up at the anchor points
shown to lift the work vehicle.
E) Hazard plate: this highlights a risk of hands being
English language
TECHNICAL INFORMATION
The illustration shows the locations and meanings of the
signs affixed.
B C
G
12
FOXDRIVE (5 P)
RAPID SHIFT DX
402783
BUDRIO (BO)
19 12
H
FOXDRIVE (5 P)
RAPID SHIFT SX
402784
BUDRIO (BO)
F) Plant spacing plate: this shows the type of pinion to
G) Plant spacing plate: applied on the "right Rapid
H) Plant spacing plate: applied on the "left Rapid Shift"
6
A D
F
RAPID SHIFT
crushed between the dispenser and the dispenser
disc.
fit according to the plant spacing required.
Shift" wheel, it indicates the pinions to be selected,
according to the plant spacing.
wheel, it indicates the pinions to be selected, accord-
ing to the plant spacing.
2
E
Use and maintenance