Checchi & Magli BABY COMPACT Manuel D'utilisation Et D'entretien page 53

Permitted gradients
The ground conditions (slippery, sloping, etc.) and the
type of tractor used can reduced the stability of the
tractor/work vehicle assembly and cause sudden, dan-
gerous movements, especially when the work vehicle is
lifted off the ground.
Declaration of conformity
CHECCHI & MAGLI s.r.l.
Via Guizzardi n° 38
40054 – BUDRIO (BOLOGNA) - ITALIA
Hereby declares, under its own responsibility that the
planting machine in question, i.e. models:
BABY COMPACT/3, BABY COMPACT/4,
BABY COMPACT/5, BABY COMPACT/6
comply with the Essential and Health Safety Require-
ments provided for by Directive 2006/42/CE.
Guards
WARNING
Never use the machine without the safety guards.
The work vehicle is fitted with guards covering the trans-
mission components to prevent accidental contact with
the moving parts.
UN41-0653BO
English language
TECHNICAL INFORMATION
C
B
A
The tractor driver is responsible for assessing the hazards
associated with envisaged environmental conditions,
e.g., specific ground conditions (loose soil, slippery, slop-
ing ground, etc..) which require special precautions, and
it is up to the driver to take the necessary measures to
eliminate or reduce these hazards.
The following regulations in particular have been ap-
plied: UNI EN ISO 12100-1, UNI EN ISO 12100-2 and UNI
EN 13857, on machine safety.
Budrio
CHECCHI & MAGLI s.r.l
Legal representative
Nerio Checchi
The picture shows the casings fitted to protect the mov-
ing parts.
The casings (A - B) are fitted on each driving wheel.
The casings (C - D - E - F) are fitted on each planting
unit.
The casing (G) is fitted on each driving wheel with the
Rapid Shift gearbox.
D
5
2
E
F
G
RAPID SHIFT
H
Use and maintenance