Checchi & Magli BABY COMPACT Manuel D'utilisation Et D'entretien page 74

Adjusting the clearance between the runners and trays (optional)
A
C
E
G
UN41-0695DO
For this operation, proceed as outlined below.
1) Loosen the runner bolts (A) and (E).
2) Loosen the bolts (C) and (G) and lower the parts (D)
and (H).
3) Place a tray inside the runners.
4) Adjust the runners so that correct clearance is guar-
anteed.
English language
ADJUSTMENT INFORMATION
There must be enough clearance between the run-
ners (B) and (F) and the tray (L) to allow the tray to
be inserted and removed without having to slide it
along the runners.
5) Screw the bolts (A - E).
6) Position the parts (D) and (H) so they are touching
the respective runners (B) and (F).
7) Screw the bolts (C - G).
26
A D
C
E
H
G
Use and maintenance
5