Standard Sterilization Procedure - Tecno-gaz Europa B xp Mode D'emploi

Sterilization means adopting precise operational protocol and applying a system.
Autoclave is the final link of this system.
Those who do not follow all of the various phases of the sterilization system will be unsatisfied with the final
result.
TECNO-GAZ SpA produces all the devices for each phase of the sterilization cycle.
Therefore it is necessary to:
1 - Prepare a precise written operational protocol to distribute to all operators assigned to sterilization.
TECNO-GAZ can provide these personalized protocols.
2 - Follow carefully and with attention all of the sterilization cycle phases:
DISINFECTION obligatory phase, in base of that is obligatory for the operator security, to be done with
immersion in chemical liquids or thermo-disinfection.
Ref. TECNO GAZ - vasche mod. artica – termodisinfettore mod. aqua
CLEANSING the most important phase which insures the removal of all types of residual, chemical
and organic. The most suitable instruments are ultrasound baths.
Ref. TECNO GAZ – ultrasound mod. tecna
DRYING essential phase to avoid corrosion of instruments and interference of the sterilization cycle.
Ref. TECNO GAZ – device mod .unika
PACKAGING essential phase for maintaining sterile the treated instruments.
Ref. TECNO GAZ – sealer mod .opera
STERILIZATION final phase of steam sterilization
Ref. TECNO GAZ –autoclave mod. europa b xp
15 – STANDARD STERILIZATION PROCEDURE
70 DXBA408 Rev_14