Publicité
Les langues disponibles
Les langues disponibles
4.
Attach the propeller using the washer from the engine.
Use a box wrench to prevent damaging the nut.
5.
Attach the spinner cone using the hardware included
with the spinner. Make sure the propeller does not
contact the spinner cone.
6.
Attach the muffl er to the engine using the hardware
included with the muffl er.
7.
Cut the cowling to fi t over the muffl er and exhaust
stacks. Work slowly for the best results. Use a piece of
high-temperature tubing to extend the exhaust from the
muffl er out of the cowling.
WING INSTALLATION
1.
Slide the wing tube into the wing tube socket.
EN
4.
5.
6.
7.
1.
2.
Slide the wing panel into position, connecting the
extensions from the wing into the fuselage.
3.
Slide the wing tight against the fuselage.
4.
Secure the wing to the fuselage using a 1/4-20 x 2-inch
nylon wing bolt.
The nylon bolts can be shortened using a
razor saw to make their installation easier.
24
2.
3.
4.
Publicité
