battioni Pagani GARDA EVO Serie Notice D'emploi Et D'entretien page 152

instruction manual
for use and maintenance of the combined groups for the GARDA EVO series
Insert the seal 49 onto the
Secure the cover 68 onto the
body using the 4 screws 51
and the 4 washers 50.
7.10 ASSEMBLY INSTRUCTIONS OF GARDA EVO IN CONFIGURATION
GK USCITA "B"
Insert the shaft 19 through the
sliding hub 15 and the toothed
wheel 67 and x the latter with
the eight screws 16.
Insert the bearing 14 and the oil
seal 24 onto the shaft 15.
Attach the Seeger 17 onto the
relevant grooving of the shaft 19.
page 134
cover 68.
51
67
24
50
17
19
15
16
14
49
68