battioni Pagani GARDA EVO Serie Notice D'emploi Et D'entretien page 141

7 - DISASSEMBLY AND ASSEMBLY INSTRUCTIONS
DISASSEMBLY INSTRUCTIONS
The following disassembly operations must only be carried out by designated and quali ed personnel.
Disassembly personnel must use the speci ed personal protective equipment.
7.1 - UNINSTALLATION
The GARDA EVO group must be uninstalled using the following procedure:
1) stop the PTO of the tractor.
2) remove the cardan shaft from the PTO in version D or disconnect the hydraulic motor in the H version or remove
the transmission belts in case of version P;
3) remove the connecting pipe that connects the rotary blades vacuum pump to the tank, as described in the
"Instructions manual for use and maintenance" of the individual pumps;
4) remove any hydraulic connections;
5) disconnect the centrifugal pump from the tank;
6) remove the fixing screws from the gearbox;
7) uninstall the GARDA EVO Group;
Fig. 1
for use and maintenance of the combined groups for the GARDA EVO series
PPE to be used during
these maintenance
operations
Instruction manual
page 123