battioni Pagani GARDA EVO Serie Notice D'emploi Et D'entretien page 148

instruction manual
for use and maintenance of the combined groups for the GARDA EVO series
7.5 - DISASSEMBLY INSTRUCTIONS OF COVERS OF GARDA EVO
COMMON TO EACH CONFIGURATION
37
36
34
11
7.6 DISASSEMBLY INSTRUCTIONS OF GARDA EVO IN CONFIGURATION
REAR CENTRIFUGE ON OUTPUT "A"
page 130
35
10
30 31
29
28
14
12
Loosen the 4 screws 31.
Remove the cover 30
and the seal 29.
Remove the bearing 28.
Remove the 4 screws 34.
Remove the cover 35
and the seal 36.
Remove the bearing 37.
Remove the 4 screws 11.
Remove the cover 10
and the seal 12.
Remove the bearing 14.
Check the seals and if necessary
replace them.
Check the bearings and if
necessary replace them.