battioni Pagani GARDA EVO Serie Notice D'emploi Et D'entretien page 143

Loosen the 4 screws 02.
Loosen the 4 screws 03.
Remove the support 05
and the seal 06.
Check the seal and if necessary
replace it.
Remove the shaft 40.
Remove the oil seal 04.
Remove the bearing 37.
Check the oil seal and if
necessary replace it.
Check the bearing and if
necessary replace it.
for use and maintenance of the combined groups for the GARDA EVO series
06
05
02
03
40
37
04
Instruction manual
page 125