Engine Maintenance; Engine Safety; Servicing The Air Cleaner - Toro TimeCutter ZS 4200T Manuel De L'utilisateur

Engine Maintenance

Engine Safety

•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Keep your hands, feet, face, clothing, and other
body parts away the muffler and other hot surfaces.

Servicing the Air Cleaner

Service Interval: Before each use or daily
Note:
Service the air cleaner more frequently (every
few hours) if operating conditions are extremely dusty
or sandy.
Removing the Foam and Paper
Elements
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean around the air-cleaner cover to prevent
dirt from getting into the engine and causing
damage.
4. Lift the cover and rotate the air-cleaner assembly
out of the engine
ARK
(Figure 35).
5. Separate the foam and paper elements
36).
31
Figure 35
Figure 36
g027800
g027801
(Figure
g027802