Recommended Maintenance Schedule(S) - Toro TimeCutter ZS 4200T Manuel De L'utilisateur

WARNING
Contact with moving parts or hot surfaces
may cause personal injury.
Keep your fingers, hands, and clothing
clear of rotating components and hot
surfaces.
•
Check all bolts frequently to maintain proper
tightness.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
Before each use or daily
After each use
Every 25 hours
Every 100 hours or yearly,
whichever comes first
Every 200 hours
Every 300 hours
Before storage
CAUTION
If you leave the key in the switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Shut off the engine and remove the key from the switch before you perform any maintenance.
Maintenance Procedure
• Change the engine oil and filter.
• Check the safety-interlock system.
• Check the air cleaner for dirty, loose, or damaged parts.
• Check the engine-oil level.
• Clean the air intake screen.
• Inspect the blades.
• Inspect the grass deflector for damage.
• Clean the mower-deck housing.
• Grease the caster wheel bearings.
• Clean the air-cleaner foam element (more often in dusty, dirty conditions).
• Check tire pressure.
• Check the belts for wear or cracks.
• Replace the air-cleaner foam element (more often in dusty, dirty conditions).
• Replace the paper air-cleaner element (more often in dirty or dusty conditions).
• Change the engine oil and oil filter (more often in dirty or dusty conditions).
• Check the spark plug(s).
• Check the in-line fuel filter.
• Replace the spark plug(s).
• Replace the in-line fuel filter.
• Check and adjust the valve clearance. Contact an Authorized Service Dealer.
• Charge the battery and disconnect the battery cables.
• Perform all maintenance procedures listed above before storage.
• Paint any chipped surfaces.
29