Towing Safety; Operating The Mower Blade-Control Switch (Pto) - Toro TimeCutter ZS 4200T Manuel De L'utilisateur

Towing Safety

•
Do not attach towed equipment except at the hitch
point.
•
Do not use the machine as a towing vehicle unless
it has a hitch installed.
•
Do not exceed the weight limits for towed
equipment and towing on slopes. The towed
weight must not exceed the weight of the machine
and operator.
•
Never allow children or others near the towed
equipment.
•
On slopes, the weight of the towed equipment may
cause loss of traction, increased risk of rollover,
and loss of control. Reduce the towed weight and
slow down.
•
The stopping distance may increase with the
weight of a towed load. Travel slowly and allow
extra distance to stop.
•
Make wide turns to keep the attachment clear of
the machine.
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Note:
Always engage the blades with the throttle in
the F position (Figure
AST
Disengaging the Blade-Control
Switch (PTO)
19
Figure 17
18).
Figure 18
Figure 19
g008945
g295538
g009174