Mounting The Bicycles - EUFAB 11572 Manuel De L'opérateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Figure 7: Mounting the third bicycle rail on
the bicycle rack
WARNING!
Personal injury or property damage due to loss of the bicycle rack or additional bicycle rail
Driving with an incorrectly mounted and secured extension for the third bicycle can lead to severe accidents.
• Before embarking on any journey, check that the extension for the third bicycle is faultless and fastened
correctly.

5.4 MOUNTING THE BICYCLES

Firstly, place the first two bicycles on the bicycle rack, as set out in the PREMIUM TG bicycle rack user instructions. Next, place the third
bicycle (max. 15 kg) on the bicycle rail of the extension, and fasten it with the frame bracket (item 8 of the scope of delivery) to the
second bicycle. Fasten the third bicycle with the wheel stoppers and safety strap.
ATTENTION!
Personal injury or material damage possible due to loose and/or
flying parts.
Improperly tightened parts on the bicycles can become loose while driving.
• Remove all parts not firmly attached to the bicycle, such as
electric bicycle batteries, bicycle pumps, panniers, bicycle boxes, child
seats or navigation devices.
NOTE
In order to improve the handling of your vehicle, mount the heaviest bicycle first. If you are carrying only one bicycle,
this should be mounted in the rail closest to the boot of the vehicle.
Figure 8: Parts which are at risk of being lost
15

Publicité

Table des Matières
loading

Table des Matières